Land Pride QH05 Series Operator's Manual

Also see for QH05 Series: Operator's manual Operator's manual

Contents

Land Pride QH05 Series Operator's Manual Manual pdf 15 page image

Section 1: Assembly & Set-UpTable of ContentsQH05, QH10, QH15, QH20, & QH30 Quick Hitches 320-003M10/26/18 11Hook-up Without Floating Top LinksRefer to Figure 1-7:1. Beginning with S/N 388293 and above, two320-048D lower bushings (#3) are shipped tied to theLand Pride Quick Hitch. Install these bushings ontothe implement’s lower 7/8" hitch pins (#1) to providea tighter and more secure mounting.2. Make certain implement’s lower hitch pins (#1) aresecured in their respective clevis.3. Place Quick Hitch release handles in the downposition as shown.4. Lower tractor’s 3-point lift arms until auto-lock hooksare below implement’s lower bushings (#3) andupper hook is below upper hitch point (#4).5. Carefully back tractor to align auto-lock hooks underimplement’s lower bushings (#3) and upper hookbelow upper hitch point (#4).6. Slowly raise 3-point lift arms until auto-lock hookslock onto the implement’s lower bushings and upperhook captures implement’s upper hitch point.7. If required, follow implement guidelines for drivelinehook-up and required driveline length.IMPORTANT: Make certain lower hitch pins are fullyseated in the auto-lock hooks and captured with lockarms above. Also, make sure upper hitch point iscaptured in the Quick Hitch upper hook.IMPORTANT: When hooking-up a driveline, makesure it is not too short to comply with shaftoverlapping guidelines. Refer to your implementOperator’s Manual for driveline hook-up instructions.Replace driveline shafts and shields if they are tooshort. See your nearest Land Pride dealer for newshafts and shields.Implement Hook-UpFigure 1-717293Release handleStandard Cat. l ConfigurationConnect Upper Hook to the Lower CenterHitch Pin/Bolt (Upper Hitch Point)Auto-Lock HooksUpper HookHook-up With Floating Top Links1. Complete steps 1-7 on this page except shorten topcenter link to keep upper hook from capturingimplement’s upper hitch point.2. Attach floating top links to Quick Hitch andimplement. Refer to “Floating Top Link” on page 17for detailed instructions.QH15 Spare BushingsAdditional bushings may be purchased from your localLand Pride dealer to make more than one implementreadily available for quick hook-up. If implement hassingle lower hitch pins, bushing kit #320-034A isrecommended. refer to “Lower Cat. I Single Hitch PinSet-up” on page 10.QH20 Spare BushingsAdditional bushings may be purchased from your localLand Pride dealer so that more than one implement isreadily available for quick hook-up.QH15 Lower BushingsPart No. Part Description320-034A 2- Stepped Bushings CAT. l to CAT. lll Adapter320-048D Spacer Tube 1.44" O.D. x .91" I.D. x 1 9/32" lg.320-044D Spacer Tube 1.44" O.D. x .93" I.D. x 1 1/2" lg.320-045D Spacer Tube 1.44" O.D. x .93" I.D. x 1 15/16" lg.320-050D Spacer Tube 1.44" O.D. x .93" I.D. x 2 3/16" lg.320-051D Spacer Tube 1.44" O.D. x .93" I.D. x 2 7/16" lg.325-017D Spacer Tube 1.44" O.D. x .93" I.D. x 2 7/8" lg.320-052D Spacer Tube 1.44" O.D. x .93" I.D. x 3 1/2" lg.QH20 Lower BushingsPart No. Part Description890-938C Stepped Bushing CAT. ll to CAT. lll Adapter890-939C Spacer Tube 1.44" O.D. x 1.14" I.D. x 1 3/4" lg.890-940C Spacer Tube 1.44" O.D. x 1.14" I.D. x 2 1/2" lg.890-941C Spacer Tube 1.44" O.D. x 1.14" I.D. x 2 3/4" lg.