28Section 4: Options & AccessoriesRC5020 (540 RPM) and RCM5020 (1000 RPM) Rotary Cutters 318-474M 4/25/12Table of ContentsHydraulic AccessoriesLand Pride offers three different kits for raising the deckwings independently to clear small obstacles in the fieldwithout maneuvering around them.Hydraulic Wing Control Kit318-553A HYDRAULIC WING CONTROL KITRefer to Figure 4-1:This kit is for tractors with three duplex outlets. It consistof two adapter fittings, one hose and one quickdisconnect coupling.3 Spool Control Valve Kit312-315A 3 SPOOL CONTROL VALVE KITRefer to Figure 4-2:This kit is for tractors with a single duplex outlet. Itconverts the single duplex outlet into three duplex outletswith three independently controlled levers. It attaches tothe existing elbow fittings at the wing cylinders, existingcenter cylinder hose and uses the existing quickdisconnect couplings supplied with the cutter to connectto the tractor’s duplex outlet.Selector Control Valve Kit312-316A SELECTOR CONTROL VALVE KITRefer to Figure 4-3:This kit is for tractors needing only one additional duplexoutlet. It converts one of the tractor’s duplex outlets intotwo duplex outlets with a control valve. A selector leveron the control valve selects which wing cylinder isoperational with the tractor hydraulic control lever. Itattaches to the existing elbow fittings at the wingcylinders and uses the existing quick disconnectcouplings supplied with the cutter to connect to one of thetractor’s duplex outlets.IMPORTANT: Never operate a cutter under anyterrain conditions where, on a continuous cut, thewing angle exceeds 45 degrees up. Damage to thewing driveline and gearboxes can occur. Raise wingonly enough to clear obstacles and then lower thewing immediately after.Follow all safety precautions in this manualespecially information regarding raising the wings upwith PTO running.Hydraulic Wing Control KitFigure 4-13 spool Control Valve KitFigure 4-2Selector Control Valve KitFigure 4-3276022760127599