Land Pride RCR1542 Operator's Manual

Also see for RCR1542: Specifications & Capacities Operator's manual

Land Pride RCR1542 Operator's Manual Manual pdf 11 page image

9Section 1: Assembly and Set-Up12/28/05 RCR1542, RCR1548, RCR1560 and RCR1572 Rotary Cutters 312-556MLand Pride Table of ContentsDriveline InstallationRefer to Figure 1-2:1. Remove the snap ring (#1) from the gearbox inputshaft. Slide the driveline (#2) on to the gearbox shaftand replace the snap ring to the gearbox shaft. Thesnap ring is for extra security in case the shear bolt(#3) should break. Align the holes in the drivelinewith the hole in the gearbox input shaft and insert the1/2” x 3 1/2” long bolt (#3) and secure with the 1/2”nut (#4) and 1/2” jam nut (#5).2. Secure the chain on the driveline to the drivelinecone to restrict outer shield from rotating.Driveline InstallationFigure 1-2163853-Point Hook-UpRefer to Figure 1-3:! DANGERTractor hook-up can be hazardous to your health or that ofyour helper. Do not allow anyone to stand between the _____and the tractor during hook-up operations. Do not operate thehydraulic 3-point lift controls while someone is directlybehind the tractor.1. Slowly back the tractor up to the cutter and use thetractor’s 3-point hydraulic control to adjust the lowerlink arms up or down to match the height of the cutterhitch pins.2. Slide the the lower link arms hitch link holes onto thecutter hitch pins.3. Install a linch pin or other fastener (supplied bycustomer) through the hitch pin hole to lock the lowerlinks into position.4. Connect the top link to the upper pivot hitch using the3/4" clevis pin supplied.Tractor Hook-UpFigure 1-316386