Land Pride RTR15 Operator's Manual

Also see for RTR1550: Specifications & Capacities Specifications & Capacities Operator's manual Operator's manual Operator's manual

Land Pride RTR15 Operator's Manual Manual pdf 22 page image

20 RTR10 & RTR15 Series Rotary Tillers 311-431M 11/01/11Section 3: AdjustmentsTable of ContentsSection 3: AdjustmentsRTR15 Tiller Hitch SideshiftRefer to Figure 3-2:The three point and gearbox can be sideshifted to the leftof tiller center for various working conditions.! CAUTIONAfter sideshifting check to see that the PTO shaft clears allshields on the tiller, tractor, and the tiller hitch. If not,decrease sideshift until clearance is obtained.1. Loosen the two u-bolts (#1) which hold the tophitch and gearbox frame (#3) to the front tube.2. Remove the two bolts (#2) which hold the tophitch and gearbox frame (#3) to the rear of the tiller.3. Loosen the two u-bolts (#4) which hold the two lowerhitch clevises (#5) to the front tube.4. Slide the top hitch and gearbox assembly (#3) to thedesired location.5. Re-center the lower hitch clevises (#5) with respectto the gearbox.6. Retighten all bolts and nuts referring to the TorqueValues Chart in the “Appendix” section on page 33.NOTE: For maximum sideshift, position lower lefthitch clevis outside the side plate.RTR15 Tiller Hitch SideshiftFigure 3-222255RTR10 Tiller Hitch OffsetRefer to Figure 3-1:By shifting the lower hitch clevises (#1) to the side, alimited amount of offset can be obtained.1. Loosen the two u-bolts (#1) which hold the two lowerhitch clevises (#2) to the front tube.2. Slide the two lower hitch clevises (#2) an equalamount to the desired location.3. Retighten all bolts and nuts to the correct torquevalue.! CAUTIONAfter offsetting, check to see that the driveline clears allshields on the tiller, tractor, and tiller hitch. If not, decreaseoffset until clearance is obtained.RTR10 Tiller Hitch OffsetFigure 3-122249