Landa EHW4-2000C Operator's Manual

Also see for EHW4-2000C: Operator's manual

Landa EHW4-2000C Operator's Manual Manual pdf 26 page image

8.941-114.0 • LANDA EHW • Rev. 08/12OPERATOR’S MANUAL PRESSURE WASHER26HANDHELD WIRELESS OPERATING INSTRUCTIONSFor Wireless Remote Control OperationStep 1: Push the control panel pump switch to the "ON"position (first click). With the switch in this position thewireless remote is ready for use.Step 2: To control pressure washerin remote mode, press transmit-ter button 1 to turn pump "ON".Press transmitter button 2 to turnpump "OFF". Pump can also becontrolled manually by pressingthe control panel pump ON/OFFswitch.Chemical 1: To start chemical1 flow, press transmitter button3. The green indicator light willilluminate when chemical 1 is inuse. Press button 3 again to stopchemical 1 flow.Chemical 2: To start chemical 2 flow, press transmitterbutton 4. The green indicator light will illuminate whenchemical 2 is in use. Press button 4 again to stopchemical 2 flow.When machine is not in use, push control panel pumpswitch to the "OFF" position. Store transmitter on thetransmitter bracket.NOTE: Normal operating range for the transmitter isabout 500 feet interference-fee (line of site); 300 feetlight interference (inside warehouse, pallet shelves);and 100 feet heavy interference (through concrete/stone walls, metal doors). If greater range is desired,the antenna can be mounted at a separate location.This requires a longer cable - RG-58-U coaxial withBNC end connectors.TransmitterPump SwitchTransmitterBracketChemical 2LightChemical 1Light