8.917-208.0 • HOT Operator Manual • Rev. 03/129PRESSURE WASHER OPERATOR’S MANUAL89172080-12OPERATION INSTRUCTIONSSTEP 1: STOP! Read opera-tor’s manual before operating thisma chine. Failure to read operationand warning in structions may re-sult in personal inju ry or proper tydamage. Connect water supplyhose to inlet connec tor and turnwater on.STEP 3: Before installing nozzle,turn on water supply and runmachine, allowing water to flushthrough the system until clear.Turn pump switch ON or turn knobto pump posi tion. When a steadystream of water flows from thespray gun and wand, the machineis ready for the nozzle to be in-stalled. Turn the variable pres surecontrol handle clockwise to raisethe pressure. For hot water wash-ing, turn the burner switch ON orturn knob to the burner position.(The burner will light automati-cally.)STEP 2: On machines with vari-able pres sure wands, grip spraygun securely. Then turn the vari-able pressure control handle coun-terclockwise to reduce pressure.89172080-13Selection of high or low pressure is accompanied byturn ing the han dle. Note: High pressure nozzle mustbe in serted at end of wand to obtain high pressure.To apply soap, read detergent instructions.Variable PressureControl HandleTriggerVariable PressureWand (VP)HighPressureNozzleBrass Soap Nozzle89172080-1089172080-11Pump/BurnerKnobBurnerSwitchPumpSwitchAttach the high pressure hose tothe spray gun using tefl on tape onhose threads. Attach nozzle exten-sion to spray gun/wand. Tightenboth by hand.Before installing nozzle, turn onwater supply and run machineallowing water to flush through thesystem until clear.Nozzle ExtensionSprayGun/WandWandCouplerPressure or SoapNozzlePull spring-loaded collar of thewand coupler back to insert yourchoice of pressure nozzle or soapnozzle. Release the coupler collarand push the nozzle until the collarclicks. Pull the nozzle to makesure it is seated properly.Pressure or SoapNozzleWandCouplerCouplerCollarINSULATED STRAIGHT WAND ASSEMBLY