Landa VHP Series Operator's Manual

Landa VHP Series Operator's Manual Manual pdf 15 page image

15OperationsOperating InstructionsSTEP 1: STOP! Read operator’smanual before operating thismachine. Failure to read operationand warning instructions may resultin personal injury or propertydamage. Connect water supplyhose to inlet connector and turnwater on.STEP 4: Pull the spring-loadedcollar of the wand coupler collarback to insert your choice ofpressure nozzle. CAUTION: Neverreplace nozzles withoutengaging the safety latch on thespray gun trigger.STEP 2: Turn all switches off.Remove and position LP tank as farfrom machine as supply hose willallow.STEP 5: Release the coupler collarand push the nozzle until the collarclicks. Pull the nozzle to make sureit is seated properly.STEP 3: Before installing nozzle,Pull trigger on spray gun allowingwater to flow until all air has beendischarged from the system. Checkfor water leaks and tighten asneeded.Grip spray gun variable pressurewand securely. Then turn thevariable pressure control handlecounterclockwise to flush anydebris out of soap nozzle..CouplerCollarTurn Pump/BurnerSwitch OffLanda VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - TVariable PressureControl Handle TriggerVariable PressureWand (VP)HighPressureNozzleBrass SoapNozzleSTEP 6: Selection of high or low pressure is accompaniedby turning the handle.NOTE: High pressure nozzle must be inserted at end ofwand to obtain high pressure. To apply soap readoperator's manual.