Landoll VT Plus 7431 Operator's Manual

Contents

Landoll VT Plus 7431 Operator's Manual Manual pdf 98 page image

4-22 F-561-0818OPERATION AND MAINTENANCEStorage1. The service life of the VT Plus will be extended byproper off-season storage practices. Prior to storingthe unit, complete the following procedures:a. Completely clean the unit.b. Inspect the machine for worn or defective parts.Replace as needed.c. Repaint all areas where the original paint is wornoff.d. Grease all exposed metal surfaces of shanks,points and discs.e. Apply a light coating of oil or grease to exposedcylinder rods to prevent them from rusting.f. Lubricate each point of the machine as stated in“Lubrication Maintenance” on page 4-21.2. Store the unit in a shed or under a tarpaulin to protectit from the weather. The ground tools and tires shouldrest on boards, or some other object, to keep themout of the soil.3. If the unit must be stored outside, unfold the VT Plusto prevent moisture buildup in the disc gang andwheel bearings.4. If the unit is stored in the folded position, make surethe transport lock pins are installed to prevent wingframes settling.5. Slide the rear jack tube from transport position andinto slot from bottom of rear jack mount. Pin jack tubein position. Attach jack to rear jack tube and pin inposition. Crank jack until the rear of the machine issupported (See Figure 4-23.)Figure 4-23: Rear Jack Transport PositionREAR JACKMOUNTLOCK PINAND 1/4 X 3ROLL PINREAR JACKSQUARE TUBEJACKREAR FRAMErear jack storage position