Scan Settings352❒ Usually, transmission takes short-er when Auto resolution is select-e d t ha n Detail resolu tion isselected. However, transmissionfor some originals containing nor-mal size characters and small sizecharacters takes longer becauseresolution modes are changed.A Press the {Resolution} key to switchbetween resolutions. The indica-tors above the key show the cur-rent selection. When none of theindicators are lit, Standard is se-lected.Original TypeIf your original contains photographsor colored illustrations, select Half-tone to optimize image clarity.❖ HalftoneSelect Halftone to send an originalcontaining a halftone image suchas a photograph or a color original.Note❒ If you select Halftone, resolution isautomatically set to Detail. Even ifyou do not select Halftone again,the resolution will not return toStandard.❒ If you select Halftone, the trans-mission will take longer than whenit is not selected.❒ You can set whether the machinereturns to the Original Type de-fault setting after every transmis-sion with the User Parameters(Switch 01 Bit 7). See p.82 “UserParameters”, Advanced Features.A Press the {Halftone} key.
