Lanier 3730 Operating Instructions Manual

Contents

Lanier 3730 Operating Instructions Manual Manual pdf 45 page image

Dialing392C Press the {Speed Dial} key.D Enter the two digit code (00 to 99)for the destination with the num-ber keys.Note❒ When a name is stored for thedestination, the name is dis-played, and when no name isstored, the fax number is dis-played.❒ If you wish to dial another des-tination, press the {OK} key anddial another fax number.❒ If you make a mistake, press the{Clear/Stop} key, and try again.E Press the {Start} key.Using GroupsYou can store multiple destinations asa single Group and simply specify aparticular Group.You must store the destinations' faxnumber in a Group beforehand.Additionally, you can store destina-tion names and a Group name inGroups.The method for specifying Groupsdiffers according to the way theywere programmed.• When programmed in a Quick Di-al: Press the Quick Dial key.• When not programmed in a QuickDial: Use the User Function Key.Group Dial is assigned to {F4} as adefault setting. If this setting ischanged, program the Group func-tion in a User Function key ( {F1}to {F5} ). When you want to speci-fy a destination, press the UserFunction key in which the GroupFunction is programmed, and thenpress the Group number with thenumber keys. See p.51 “User Func-tion Keys”, Advanced Features.Limitation❒ You cannot use Immediate Trans-mission to send Groups. You canonly use Memory Transmission.Note❒ Quick Dials programmed for Groupscannot be used for any other func-tion.❒ To register, edit, or delete Groups,see p.59 “Groups”❒ To check the contents of allGroups, print the Group Dial list.See p.54 “Printing Reports/Lists”,Advanced Features.