Lanier LD225 Network Manual
Also see for 8025: Function guideFax guideOperating instructionsFunction guideSettings guide
                                                                                                                                                      | |
Contents
| 
Connecting and Setting Up342Interface SettingsNetwork❖ IP AddressBefore using this machine in the net-work environment, you must config-ure the IP address and subnet mask.• Auto-Obtain (DHCP)• SpecifyWhen you select [Specify], enterthe [IP Address]and [Sub-net Mask]as “xxx.xxx.xxx.xxx”(“x” indi-cates a number).• IP Address: 011.022.033.044• Sub-net Mask:000.000.000.000Note❒ Default: Auto-Obtain (DHCP)❒ If you use the interface for Eth-ernet and IEEE 1394 (IP over1394) at the same time, settingsmust be made carefully. Seep.133 “Using DHCP”.❒ If you install the optional IEEE1394 interface board and use theIEEE 1394 interface, you mustset the address of the domain,different from the [IP Address] of[IEEE 1394]. If you intend to setthe address for the same do-main, set a different value forthe [Sub-net Mask].❒ When you select [Specify], besure not to set the same [IP Ad-dress] as that of another ma-chines on the network.❒ The physical address (MAC ad-dress) also appears.❖ Gateway AddressA gateway is a connection or interchangepoint between two networks. Configurethe gateway address for the router orhost computer used as a gateway.• Gateway Address:000.000.000.000Note❒ Default: 000.000.000.000❖ DNS ConfigurationMake settings for the DNS server.• Auto-Obtain (DHCP)• SpecifyWhen you select [Specify], enterthe DNS Server IP address as“xxx.xxx.xxx.xxx”(“x” indi-cates a number).• VDNS Server 1:000.000.000.000• VDNS Server 2:000.000.000.000• VDNS Server 3:000.000.000.000Note❒ Default: Auto-Obtain (DHCP)❖ DDNS ConfigurationYou can specify the DDNS settings.• Active• Inactive❖ Domain NameYou can specify the domain name.• Auto-Obtain (DHCP)• Specify• Domain Name❖ WINS ConfigurationYou can specify the WINS serversettings.• OnIf [On] is selected, enter the [PrimaryWINS Server] and [Secondary WINSServer] IP address as “xxx.xxx.xxx.xxx”(“x” indicates a number).If DHCP is in use, specify the[Scope ID].• Primary WINS Server• Secondary WINS Server• Scope ID• Off |
Related manuals for Lanier 8025
manualsdatabase
Your AI-powered manual search engine