Lanier LD235 Copy Reference Manual

Also see for LD235: Network guide Function guide Fax guide Operating instructions Settings guide

Contents

Lanier LD235 Copy Reference Manual Manual pdf 113 page image

Accessing User Tools (Copier/Document Server Features)1034Input/Output❖ Switch to Batch (SADF)You can select to have Batch modeor SADF mode displayed whenyou press the [Special Original] key.See p.14 “Batch mode”.Note❒ Default: Batch❖ SADF Auto ResetIn SADF mode, an original must beset within a specified time after theprevious original has been fed.You can adjust this time from 3 to99 seconds in increments of 1 sec-ond .Note❒ Default: 5 seconds❖ Rotate Sort: Auto Paper ContinueYou can specify to continue copy-ing when paper of the required ori-entation has run out during rotate-sorting. See p.33 “Rotate Sort”.Note❒ If you select [No] :• When paper of the requiredorientation runs out, the ma-chine stops copying andprompts you to supply copypaper. After you have loadedpaper, the machine will con-tinue copying.❒ If you select [Yes] :• Copying continues using copypaper of a different orienta-tion. The copy job will finisheven if you have left the ma-chine.❒ Default: No❖ Auto SortYou can specify whether Sortmode is selected when the ma-chine is turned on or the mode iscleared.Note❒ Default: No❖ Memory Full Auto Scan RestartWhen memory becomes full whilescanning originals, the machinecan make copies of scanned origi-nals first, and then automaticallyproceed scanning remaining origi-nals.You can enable or disable thisfunction.Note❒ If you select [No] :• When memory becomes full,the machine stops operationallowing you to remove thecopy pages delivered on theoutput tray.❒ If you select [Yes] :• You can leave the machineunattended to make copies,but sorted pages will not besequential.❒ Default: No❖ Select Stack FunctionSpecify whether Stack or RotateSort has priority to be shown onthe initial display.Note❒ Default: Stack❒ An optional finisher is requiredto use this function.