Lanier LD235 Copy Reference Manual

Also see for LD235: Network guide Function guide Fax guide Operating instructions Settings guide

Contents

Lanier LD235 Copy Reference Manual Manual pdf 30 page image

Copying202Copying from the Bypass TrayUse the bypass tray to copy onto OHPtransparencies, adhesive labels, trans-lucent paper, postcards and copy pa-per that cannot be loaded in the papertrays.PreparationWhen the duplex unit is attached,the default is [1 Sided→2 Sided].When copying from the bypasstray, select [1 Sided] for copying in[Dup./Combine/Series] (for example[1 Sided→1 Sided] or [2 Sided→1 Sid-ed] ). You can change the initial set-tings. See p.94 “Duplex ModePriority” .Important❒ When paper larger than 433 mm insize is used, the paper may becomewrinkled, may not be fed into themachine, or may cause paper jams.Note❒ If you do not use the standard sizecopy paper or if you use special pa-per, you should input vertical andhorizontal dimensions. See p.16“Placing custom size originals”.The sizes that you can input are asfollows:*1 The range is 148–432 mm (5.8"–17")when the booklet finisher is in-stalled.❒ The machine can automatically de-tect the following sizes as standardsize copy paper:❒ When copying on OHP transpar-encies or paper heavier than 128g/m 2 (about 34 lb.), you need tospecify the paper type. See p.22“When copying onto special pa-per” .❒ The maximum number of sheetsyou can load at the same time de-pends on paper type. The maxi-mum number of sheets should notexceed the upper limit.A Open the bypass tray.Metricversion• Vertical: 100–297 mm• Horizontal: 148–600 mm *1Inchversion• Vertical: 3.9"–11.6"• Horizontal: 5.8"–23.4” *1MetricversionA3L, A4KL, A5KL,8 1/ 2" × 13"LInchversionA3L, 11" × 17"L,8 1/ 2" × 11"KL, 5 1/ 2" ×8 1/ 2"LZDSH110J