Lanpro LP-348 User Manual

Also see for LP-348: User guide Manual in Client Mode

Lanpro LP-348 User Manual Manual pdf 5 page image

1-2 Key Features• Standards Compliant• WEP support• DHCP Client SupportRADIUS Accounting• SNMP Support• Multiple operating modesRepeater mode• VAPs (VLAN)• QoS• Wi-Fi Multi-media (WMM)The LP-348 is user-friendly and provides solid wireless and networking support. Thefollowing standards and conventions are supported:The Wireless Access Point complies with the IEEE 802.11b/g for Wireless LANs.Support for WEP is included. 64-bit, 128-bit, and 152-bit keys.DHCP Server provides a dynamic IP address to PCs and other devices upon request. Theradio can act as a client and obtain information from your DHPC server.Enable accounting on the access point to send accounting data about wireless clientdevices to a RADIUS server on your network.Support for Simple Network Management Protocol (SNMP) Management InformationBase (MIB) management.1. Access point2. StationAdapter3. Point-to-Point Bridge.4. Wireless Repeater5. Inter-buildingConfigure the radio as a wireless repeater to extend the coverage area of your wirelessNetwork.Assign Multi-SSIDs on your radio (one SSID per VAP) to differentiate policies andservices among users forming a wide variety of VLANs.Radio also supports the voice-prioritization schemes by using the 802.11b/g wirelessphones via enable the WMM application.•Use this feature to support quality of service for prioritizing traffic from the Ethernet to theaccess point.•www.lanpro.com