Lanpro LP-348 User Manual

Also see for LP-348: User guide Manual in Client Mode

Lanpro LP-348 User Manual Manual pdf 52 page image

7-3 Upgrade FirmwareWhen uploading software to the LP-348 Access Point, it is important not tointerrupt the Web browser by closing the window, clicking a link, or loading anew page. If the browser is interrupted, the upload may fail, corrupt the software,And render the AP completely inoperable.The Web browser used to upload new firmware into the AP must support HTTPuploads, such as Microsoft Internet Explorer 6.0 or above, or Netscape Navigator4.78 or above.The software of the radio is stored in FLASH memory, and can be upgraded as newsoftware is released by. The upgrade file can be sent via your browser.1. Download the new software file and save it to your hard disk.2. From the main menu Management section, click the Upgrade Firmware link to displaythe screen above.3. In the Upgrade Firmware menu, click the Browse button and browse to the location ofthe image (.RMG) upgrade file.4. Click Upload. When the upload completes, your wireless access point willautomatically restart. The upgrade process typically takes about 150 seconds. Insome cases, you may need to reconfigure the wireless access point after upgrading.Figure: 7-5 Upgrade Firmwarewww.lanpro.com