40static address table staticshow mac-address-tablefilterP Show filter MACaddress table.switch#show mac-address-tablefilterno mac-address-tablestatic hwaddr[MAC]I Remove an entry ofMAC address table ofinterface (static)switch(config)#interfacefastEthernet 2switch(config-if)#no mac-address-table static hwaddr000012345678no mac-address-tablefilter hwaddr[MAC]G Remove an entry ofMAC address table(filter)switch(config)#no mac-address-table filter hwaddr 000012348678no mac-address-table G Remove dynamicentry of MAC addresstableswitch(config)#no mac-address-tableSNMP Commands SetCommands Level Description Examplesnmp system-name[System Name]G Set SNMP agentsystem nameswitch(config)#snmp system-name l2switchsnmp system-location[System Location]G Set SNMP agentsystem locationswitch(config)#snmp system-location labsnmp system-contact[System Contact]G Set SNMP agentsystem contactswitch(config)#snmp system-contact wheresnmp agent-mode[v1v2c|v3|v1v2cv3]G Select the agent modeof SNMPswitch(config)#snmp agent-modev1v2cv3snmp community-strings [Community]right[RO/RW]G Add SNMP communitystring.switch(config)#snmp community-strings public right rwsnmp-server host[IP address]community[Community-string]G Configure SNMPserver hostinformation andcommunity stringswitch(config)#snmp-server host192.168.1.50 community publictrap-version v1(remove)
