54System InformationAssign the system name, location and view the system information. System Name: Assign the name of switch. The maximum length is 64 bytes. System Description: Displays the description of switch. This column is read only;cannot be modified. System Location: Assign the switch physical location. The maximum length is 64bytes. System Contact: Enter the name of contact person or organization. Firmware Version: Displays the switch‘s firmware version. Kernel Version: Displays the kernel software version. MAC Address: Displays the unique hardware address assigned by manufacturer(default).System information interfaceIP ConfigurationUser can configure the IP Settings and DHCP client function DHCP Client: Enable or disable the DHCP client function. When DHCP clientfunction is enabled, the industrial switch will be assigned an IP address from thenetwork DHCP server. The default IP address will be replaced with an IP addresswhich is assigned by the DHCP server. After user click ―Apply‖ button, a pop-updialog show up. It is to inform the user that when the DHCP client is enabled, thecurrent IP will lose and user should find the new IP on the DHCP server.