20of member ports.aggregator group[GroupID] [Port-list]nolacpG Assign a static trunkgroup.[GroupID] :1~3[Port-list]:Member portlist, This parametercould be a portrange(ex.1-4) or a portlist separate by acomma(ex.2, 3, 6)switch(config)#aggregator group1 2-4 nolacporswitch(config)#aggregator group1 3,1,2 nolacpshow aggregator P Show the informationof trunk groupswitch#show aggregator 1orswitch#show aggregator 2orswitch#show aggregator 3no aggregator lacp[GroupID]G Disable the LACPfunction of trunk groupswitch(config)#no aggreator lacp1no aggregator group[GroupID]G Remove a trunk group switch(config)#no aggreatorgroup 2VLAN Commands SetNetstar Commands Level Description Examplevlan database P Enter VLAN configuremodeswitch#vlan databaseVlanmode[portbase| 802.1q |gvrp]V To set switch VLANmode.switch(vlan)#vlanmode portbaseorswitch(vlan)#vlanmode 802.1qorswitch(vlan)#vlanmode gvrpno vlan V No VLAN Switch(vlan)#no vlanPorted based VLAN configurationvlan port-basedgrpnameV Add new port basedVALNswitch(vlan)#vlan port-basedgrpname test grpid 2 port 2-4
