30switch(config-if)#no monitor802.1x Commands SetNetstar Commands Level Description Example8021x enable G Use the 802.1x globalconfigurationcommand to enable802.1x protocols.switch(config)# 8021x enable8021x system radiusip[IP address]G Use the 802.1x systemradius IP globalconfigurationcommand to changethe radius server IP.switch(config)# 8021x systemradiusip 192.168.1.18021x system serverport[port ID]G Use the 802.1x systemserver port globalconfigurationcommand to changethe radius server portswitch(config)# 8021x systemserverport 18158021x systemaccountport[port ID]G Use the 802.1x systemaccount port globalconfigurationcommand to changethe accounting portswitch(config)# 8021x systemaccountport 18168021x system sharekey[ID]G Use the 802.1x systemshare key globalconfigurationcommand to changethe shared key value.switch(config)# 8021x systemsharekey 1234568021x system nasid[words]G Use the 802.1x systemnasid globalconfigurationcommand to changethe NAS IDswitch(config)# 8021x systemnasid test1
