Using the Flash ( / / )Using the Self-Timer ( )This mode is used to take a picture with a 10second delay.1. Press the “ " button to select the self-timer setting.The appears on the LCD monitor.2. Take the picture by pressing the "shutter" button.You have 10 seconds to capture the photo, indicatedby the camera beeping and the self-timer indicatorblinking on the front of the camera." " iconThe flash mode is used to add extra light to your image. Press the flash " "button to select the flash setting. The flash setting changes ( , , )each time you press the “ " button. And the selected flash mode appearson the LCD monitor.NOTE: Auto Flash :Auto Red-Eye Reduction with Auto Flash :No FlashSHQ EV+0.0SDSHQ EV+0.0SD SHQ EV+0.0SD SHQ EV+0.0SDAuto Red-Eye Reductionwith Auto FlashAuto Flash No Flash17NOTEPress the “ " button again to cancel this mode.
