Using the Macro ( )1. The macro mode is used to take a close-upphotos up to 8 inches. Slide the macro switchfrom Standard to Macro mode. The " " iconappears on the LCD monitor.2. Press the on/off " " button. The camera willbeep.Adjusting the Exposure CompensationAdjust the exposure compensation setting toobtain the optimum image brightness (Exposure)when the subject is much brighter or darker thanthe background.1. Press the "EV" button to get into the ExposureValue mode. The exposure compensation barwill appear on the LCD monitor.2. Press the button. The brightness of thesubject will be adjusted according to the exposure value. You cansee the change on the LCD monitor." " or " "3. Press the “OK" button to exit.NOTEThe settings can be adjusted in 1/2 increments in the rangeof -2.5EV~+2.5EV. The higher the value, the greater the exposure(brightness).18NOTEIn the macro mode, the flash will be turned off.
