Ediz. 010 - 06/2015DETRANSPORTAND UNPACKING• The packed parts should be handled as indicatedin the symbols and markings on the outside of thepacking.• Before installing the equipment, ensure that the areato be used is large enough for such purposes, isproperly lit and has a clean, smooth floor surface.• The manufacturer will not be responsible for theunloading operations and transport to the workplaceof the machine.• Check the packing is undamaged on receipt of theequipment. Unpack the machine and verify if therehas been any damage due to transportation.In case of damage, call immediately LARIUS andthe Shipping Agent. All the notices about possibledamage or anomalies must arrive timely within 8days at least from the date of receipt of the plantthrough Registered Letter to the Shipping Agent andto LARIUS.The user is responsible for the operations of unlo-ading and handling and should use the maximumcare so as not to damage the individual parts orinjure anyone.To perform the unloading operation, use only qualifiedand trained personnel (truck and crane operators, etc.)and also suitable hoisting equipment for the weightof the installation or its parts.Follow carefully all the safety rules.The personnel must be equipped with the necessarysafety clothing.The disposal of packaging materials is a customer’scompetence and must be performed in accordancewith the regulations in force in the country where theplant is installed and used.It is nevertheless sound practice to recycle packa-ging materials in an environment-friendly manner asmuch as possible.SAFETY RULES• THE EMPLOYER SHALL TRAIN ITS EMPLOYEES ABOUTALL THOSE RISKS STEMMING FROM ACCIDENTS, ABOUTTHE USE OF SAFETY DEVICES FOR THEIR OWN SAFE-TY AND ABOUT THE GENERAL RULES FOR ACCIDENTPREVENTION IN COMPLIANCE WITH INTERNATIONALREGULATIONS AND WITH THE LAWS OF THE COUNTRYWHERE THE PLANT IS USED.• THE BEHAVIOUR OF THE EMPLOYEES SHALL STRICTLYCOMPLY WITH THE ACCIDENT PREVENTION AND ALSOENVIRONMENTAL REGULATIONS IN FORCE IN THECOUNTRY WHERE THE PLANT IS INSTALLED AND USED.Read carefully and entirely the following instruc-tions before using the product. Please save theseinstructions in a safe place.The unauthorised tampering/replacement of oneor more parts composing the machine, the use ofaccessories, tools, expendable materials other thanthose recommended by the manufacturer can bea danger of accident.The manufacturer will be relieved from tort andcriminal liability.• KEEP YOUR WORK PLACE CLEAN AND TIDY. DISORDERWHERE YOU ARE WORKING CREATES A POTENTIAL RISKOF ACCIDENTS.• ALWAYS KEEP PROPER BALANCE AVOIDING UNUSUALSTANCE.• BEFORE USING THE TOOL, ENSURE THERE ARE NOTDAMAGED PARTS AND THE MACHINE CAN WORK PRO-PERLY.• ALWAYS FOLLOW THE INSTRUCTIONS ABOUT SAFETYAND THE REGULATIONS IN FORCE.• KEEP THOSE WHO ARE NOT RESPONSIBLE FOR THEEQUIPMENT OUT OF THE WORK AREA.• NEVER EXCEED THE MAXIMUM WORKING PRESSUREINDICATED.• NEVER POINT THE SPRAY GUN AT YOURSELVES ORAT OTHER PEOPLE. THE CONTACT WITH THE CASTINGCAN CAUSE SERIOUS INJURIES. IN CASE OF INJURIESCAUSED BY THE GUN CASTING, SEEK IMMEDIATE ME-DICAL ADVICE SPECIFYING THE TYPE OF THE PRODUCTINJECTED. NEVER UNDERVALUE A WOUND CAUSED BYTHE INJECTION OF A FLUID.• ALWAYS DISCONNECT THE SUPPLY AND RELEASETHE PRESSURE IN THE CIRCUIT BEFORE PERFOR-MING ANY CHECK OR PART REPLACEMENT OF THEEQUIPMENT.• NEVER MODIFY ANY PART IN THE EQUIPMENT. CHECKREGULARLY THE COMPONENTS OF THE SYSTEM. RE-PLACE THE PARTS DAMAGED OR WORN.• TIGHTEN AND CHECK ALL THE FITTINGS FOR CONNEC-TION BETWEEN PUMP, FLEXIBLE HOSE AND SPRAY GUNBEFORE USING THE EQUIPMENT.• ALWAYS USE THE FLEXIBLE HOSE SUPPLIED WITH STAN-DARD KIT. THE USE OF ANY ACCESSORIES OR TOOLINGOTHER THAN THOSE RECOMMENDED IN THIS MANUAL,MAY CAUSE DAMAGE OR INJURE THE OPERATOR.• THE FLUID CONTAINED IN THE FLEXIBLE HOSE CANBE VERY DANGEROUS. HANDLE THE FLEXIBLE HOSECAREFULLY. DO NOT PULL THE FLEXIBLE HOSE TOMOVE THE EQUIPMENT. NEVER USE A DAMAGED OR AREPAIRED FLEXIBLE HOSE.www.larius.euJOLLY7