Larius Jolly Operating And Maintenance Instruction Manual

Also see for Giotto: Operating and maintenance instructions

Larius Jolly Operating And Maintenance Instruction Manual Manual pdf 16 page image

Ediz. 010 - 06/2015• Lift the suction group and dip it into the tank containing thewashing liquid.• Press the equipment main switch (F5) on pos. “ON” (I).• Open the recirculation-safety valve (F7).CONNECTING THE EQUIPMENT TO THE POWER SUPPLY• Check that the switch (F5) is on the “OFF” (0) positionbefore connecting the cable to the mains.• Place the pressure control knob (F6) on the “MIN” position(turn counterclockwise).WASHING OF THE NEW EQUIPMENT• The equipment has already been adjusted at our factory withlight mineral oil left inside the pumping group as protection.Therefore, wash with diluent before sucking the product.• Ensure the gun (F3) is without nozzle.www.larius.euJOLLY10OFFF5 F6ONF5 F6F3F7F7F7OPENIt re-circulates back intothe tank without sprayingCLOSEDIt sprays out ofthe spray gun