Larius Pegaso Operating And Maintenance Instructions Manual

Also see for Pegaso: Operating and maintenance instruction

Contents

Larius Pegaso Operating And Maintenance Instructions Manual Manual pdf 21 page image

19PEGASOEnglishROUTINE MAINTENANCE• To keep sprayer in good operating condition, always clean it thoroughly and prepare it properly for storage.The air hose fitting on sprayer can get hot! Allow sprayer to cool down 5 minutes before removingair hose.• Before removing the flexible material passage hose, release the pressure.MAINTENANCE PROGRAMMETAfter ever useDaily• Flexible air and material hoses• Air and material hoseconnections• Gun• Nozzle gun• Pump• Compressor• Support pressure• Flexible product hose• Checking for wear or breaks• Clean and wash internal parts• Wash accurately• Wash the internal hose• No maintenance required• Drain the water• We suggest adding a few dropsof light mineral oil• Inspect for signs of wear• Add drops of light oil underneaththe trigger• We suggest adding a few dropsof light mineral oil• Check the product passage hoseto see if it is worn or damaged(to replace it, see next page).• Clean• Clean the sensor pawl of anyencrustations. Replace if wornor broken (to clean or replacesee page 22).• Suggested after use and whenchanging material, make the spon-ge sphere pass through the hose(see procedure on page 17).