Laser DVBT-ST35 User Manual
                    | |
DVBT-ST35 User ManualQuIcK STarT GuIDe for fIrST TIme uSeStep 1: Charging the Device1. Connect the power adaptor to the main unit, orconnect the main unit to a PC using the sup-plied USB cable.2. When the battery starts charging, the ChargeLED will Glow RED.3. When the battery is fully charged The LED willturn offStep 2: Turning the Device onPress the Power button to turn on. Press again toturn the device off.Note: The LED will turn blue when in use. The unitcan also be used while charging. The LED willturn purple if used when being charged. Thelength of time required to charge the unit willincrease if it is being used.Step 3: Setting up the device the first time.1. Double tap the DVT-T ICON in the main menu to start the Digital TV service.2. As no channels have been stored the channel bar should read “000 No Channel”.3. Tap the [MENU] button on the lower right hand side of the screen.4. Tap the [EXIT] Button to start the “First Time Instillation Wizard”.5. Tap the [OK] Button to begin.6. If the Country and Antenna settings are incorrect, tap and select the correct setting.7. Once all the settings are correct, tap the [START] button. |
Related manuals for Laser DVBT-ST35
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine