LaserLiner ClimaData Box Manual

Contents

ClimaData Box197 DownloadTo edit and document the recorded data, they must be transferred to thesoftware program. To do this, start the software and connect the deviceto the PC vis USB interface.ConnectedCancelDownload5.6 Continuous / Non-continuous recordingContinuous recording: The device records until manually stopped.Older measurements are overwritten.Non-continuousrecording:Recording stops automatically when the datamemory is full.6 Notes on the measurement process and on use1. Connect ClimaData Box to the PC2. Download and backup any existing data. Starting or configuringa new measurement deletes all existing data.3. Configure the recording function in the Setup menu and save your settings4. Depending on your start parameter, position the device at the measuringpoint and record measurements. If set to manual start, hold key 1 down.The display shows “Rec” to indicate that measurement recording is active.5. To stop recording, either hold key 1 down again, or recording stops whenthe memory is full, depending on the set parameter.6. Connect ClimaData Box to the PC, download and backup data.Position the device upright to ensure sufficient air circulation aroundthe sensor. Use the supplied wall bracket.! If the device has been placed in a cold and/or very humid environment,condensation may form in the sensor housing when it is removed dueto the change in climate. Position the device upright for a while toallow it to acclimatise.!EN