17CoatingTest-MasterENFunction / ApplicationThe coating thickness measurement device is used for the non-destructivemeasurement of coating thicknesses on metal components based on the mag-netic induction principle or eddy current principle. Main applications: Qualitycontrol in paint shops, in the automotive industry and for the inspection ofmaterial coating qualities to ensure corrosion protection of metal components.Integrated memory and statistics evaluation for measurement analysis.Completely read through the operating instructions, the „Warranty andAdditional Information“ booklet as well as the latest information underthe internet link at the end of these instructions. Follow the instructionsthey contain. This document must be kept in a safe place and passedon together with the device.!General safety instructions– The device must only be used in accordance with its intendedOTQONRD@MCVHSGHMSGDRBNODNESGDRODBHÖB@SHNMR– The measuring tools and accessories are not toys. Keep out of reach of children.m3GDRSQTBSTQDNESGDCDUHBDLTRSMNSADLNCHÖDCHM@MXV@X– Do not expose the device to mechanical stress, extreme temperatures,LNHRSTQDNQRHFMHÖB@MSUHAQ@SHNM– The device must no longer be used if one or more of its functions fail or thebattery charge is weak.– Please ensure compliance with the safety regulations set out by local andnational authorities with regard to the correct and proper use of the device.Safety instructionsDealing with electromagnetic radiation– The measuring device complies with electromagnetic compatibilityregulations and limit values in accordance with EMC-Directive 2014/30/EU.– Local operating restrictions – for example, in hospitals, aircraft, petrol stationsor in the vicinity of people with pacemakers – may apply. Electronic devicescan potentially cause hazards or interference or be subject to hazards orinterference.