the dealer and if the serial number of the appliance isrecorded. Claims can be made under this warranty inall countries in which this appliance is sold by Mayer &Wonisch or by authorised dealers of Mayer &Wonisch. In the case of making warranty claims, plea-se hand the complete appliance, together with allinformation and the invoice, to one of our dealers orsend it in to Mayer & Wonisch.1.5 PentaprismTo remove the prism: Press the prism ejectorCaution: Theprism falls out onthe opposite sideof the Handy-Laser Magnum.horizontalvertical2.3 Height projectionFit the adjustablefeet (1.2)Align the HandyLaserMagnum (1.3)a. Make a marking (preferably a cross)b. Screw out the front adjusting screw until the pincontacts with the surface.c. Align the pin using the mirror (Note: invertedimage)d. Align the vials without moving the HandyLaser.Note: Because of parallel displacement, the pin nolonger appears to be above the point; however, this isonly an optical illusion caused by parallax.a. b.c.2.6 Plumb projectionFit the adjustablefeet (1.2)Align the pin.Align the HandyLaserMagnum (1.3)Aligning the pin for the plumb projectionfunction Align the pin on the front adjustable footusing the plumb projection mirror. Caution: Alwaysproceed in the following order!2.1 Horizontal levellingFit the adjustablefeet (1.2)Align the HandyLaserMagnum (1.3)Fit the pentaprism (1.5)2.2 Vertical levellingFit the adjustablefeet (1.2)Align the HandyLaserMagnum (1.3)Fit the pentaprism (1.5)2.4 Parallel-ProjektionLay with the aligningedges on the surface tobe projected - the laser isnow exactly at the heightof the surface.2.5 90° Angle projectionFit the adjustablefeet (1.2)Align the HandyLaserMagnum (1.3)2.7 Pin as an extension of the laser beamThe pin at the rear of the tool is located in direct linewith the laser beam.Laser Radiation!Do not look intothe beamLaser Class 2Mayer & Wonisch GmbH & Co. KGDonnerfeld 2 D-59757 ArnsbergTel: +49 2932 - 638 300 Fax: +49 2932 - 638 333Liefer- und Versandanschrift:Möhnestraße 149 D-59755 Arnsbergsales@mayer-wonisch.de www.mayer-wonisch.derepair or replacement, at our option - any defectswhich are due to faulty material or workmanship.This warranty does not cover damage or defects cau-sed by improper use (e.g. operation with wrong cur-rent type/voltage, connection to unsuitable powersources, the appliance being dropped on hard surfa-ces, etc.) or improper storage, normal wear and tear,or defects which only insignificantly affect the applian-ce's value or suitability for use. The warranty will ceasein the case of interference or tampering by parties notauthorised by us.The warranty will only come into force if the date ofpurchase is confirmed by the stamp and signature ofpin3. WarrantyAs manufacturers, we assume warranty for this appli-ance for a period of 12 months from the date of pur-chase.During this warranty period, we will remedy - either byTo fit theprism