Laskomex CD-2502 Series Installation, Service And Programming Manual
                                                                    | |
Contents
| 
8 PROGRAMMING OF ENTRY PHONEP-2 Functions realized by entry phoneParameters P2 can have values [-0-] or [-1-]. In third column default value of parameter is given. Value [-1-] meansswitched on function, value [-0-] – switched off function. In fourth column type of electronic cassette (U or H) isshown where parameter‘s edition is possible.PARAM.No 1 EDITION -OLD VALUE2 3PARAM.No 21 2EDITION -NEW VALUE RETURNCCHANGEACCEPTATIONEAu Sound signal of signselected from thekeyboard1 U,H Selection of any sign from the keyboard may be signaled with short acousticsignals.ton Multitone signallingof sign selected fromthe keyboard1 U,H Selection of a key may be signalled with the same sound (one tone sig-nalling) or for every key sound of different pitch may be attributed (mul-titone signalling). The use of this function requires fulfilling the followingcondition EAu=1 and tone=1.dJ 0 U,H Duration of acoustic signal which signals selection of any sign from thekeyboard is as long as time of keystroke but no longer then 1 second. Theuse of this function requires fulfilling the following condition EAu=1 andton=1.APo Acoustic confirmingopening the electro-catch0 U,H If parameter is set up on value ”1” each opening of electro-catch will besignalized in external panel by acoustic signal.CEn Switching on codedlock service1 U,H Setting 0 value makes that function of coded lock will be switched off forall users regardless of setting for the individual apartments.CEd Permission to edi-tion of coded lockcodes by occupants1 U By default the occupants have the possibility to change the codes of a com-bination lock in user‘s menu. Setting this parameter to value ”0” blocksthis possibility to all occupants regardless of individual settings.CPo Permission to con-firm the use of lockcode1 U Each unblocking of door by means of a coded lock makes that three shortacoustic signals are generated in a uniphone mounted in an apartment whosecode was used to open the door. Parameter set to ”0” enables to switchoff this signalization in all uniphones. The signaling can be switched off forthe selected numbers (see procedure 8, page 38).CEr Confirming the useof a wrong code ofcoded lock0 U Entering the wrong code to a combination lock makes that two long acousticsignals will be generated in a uniphone mounted in an apartment to whichthere was an attempt to use a code to open the door. This is a signal foroccupants that somebody tries to break the code of a combination lock.This option allows switching off this signalization in all uniphones.CHA Request to entercode of coded lockduring enteringuser‘s menu0 U Setting parameter value to ”1” forces to enter the code of coded lock duringentering user‘s menu.idE Switching on/off ofelectronic keys1 U,H Setting parameter value to ”1” permits using electronic keys iButton (Dal-las) and/or RFID.idA Registration of elec-tronic keys by users1 U,H Setting parameter value to ”1” permits the users to register new electronickeys from user‘s menu.CAon Supply of cameraand illumination0 U,H Supply of camera and illumination of camera in external panel can be turnon continuously [1] or only during the conversation [0]. If users want tomonitor picture from camera also in the night, than the illumination ofcamera should be turn on continuously.NOTE: Supplying camera is shown on picture 9.NOTE: Even if illumination of camera is turn on continuously, it willbe turn off automatically by photoelement in case of good enoughexternal illumination.31 |
Related manuals for Laskomex CD-2502 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine