Smart SocketUser Guide© 2016-2018 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.FPGA-UG-02046-1.1 27Appendix B. DebuggingCheck the following if the programming fails: USB power supply ON/OFF switch is turned ON to provide power to the socket Device scanning failedFigure B.1. Failed to Scan DeviceClick the Detect Cable button and the Diamond Programmer starts detecting all the cables attached to USB ports. Inthe Cable dropdown menu, select the option which has the FTDI as shown in the figure below.Figure B.2. Detect Cable (FTDI)
