Smart SocketUser Guide© 2016-2018 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.FPGA-UG-02046-1.1 94. Select the appropriate programming file by clicking the Browse button in the Programming Options section asshown in Figure 5.6.5. Click OK.Figure 5.6. Programming Options6. The selected file is shown under File Name in the Diamond Programmer main interface as shown in Figure 5.7.Figure 5.7. Bit File Selection7. To start programming the device, click the Program icon shown in Figure 5.8.Figure 5.8. Program IconYou can also click Design and select Program as shown in Figure 5.9.Figure 5.9. Design Menu
