Lattice Semiconductor iCE40 UltraPlus Series User Manual

Contents

Lattice Semiconductor iCE40 UltraPlus Series User Manual Manual pdf 8 page image

MDP Based Key Phrase Detection DemonstrationUser Guide© 2018 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names aretrademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.8 FPGA-UG-02048-1.0 Start Address (Hex): 0x00000000 End Address (Hex): 0x00020000d. Click OK.Figure 4.2. Bitstream File Settings8. In the main interface, click Program Device to program the bitstream file Phrase_Detection_Bitstream.bin.9. To program the filter bank coefficient file, select the options below as shown in Figure 4.3.a. Under Programming Options, select the binary file FilterBank.bin in Programming fileb. Click Load from File to update the Data file size (Bytes) value. The default data file size does NOT default to8192. Manually change the value to 8192.c. Ensure that the following addresses are correct: Start Address (Hex): 0x00020000 End Address (Hex): 0x00030000d. Click OK.