Lauterbach PowerTrace Serial User Manual

Lauterbach PowerTrace Serial User Manual Manual pdf 27 page image

PowerTrace Serial User´s Guide 27©1989-2018 Lauterbach GmbHAGBT-based Trace PortThe trace port setup is fully integrated in TRACE32. No separate configuration is required for commonTRICORE architectures.Serial NEXUS-based Trace PortThe trace port setup is fully integrated in TRACE32. No separate configuration is required for commonNEXUS architectures like QorIQ, MPC57xx and RH850.PCIe-based Trace PortThe PowerTrace Serial can be used to trace many different architectures. Each architecture requires its ownconfiguration on the target side to configure the target device to send trace information via PCIe.A common trace setup consists of the following parts:TRACE32 start-up• Connection of system modules• Establishing host connection• Starting TRACE32 PowerViewTRACE32 setup• Debug and trace port connection• CPU (selection, system mode,...)• Trace logic (base address, filter,...)• Trace portTarget setup• Configuration of PCIe root complex and trace source• Peripheral (external buffer enable,...)• GPIO/trace port (PLL, pin manager,...)• Application (frequency, I/O setup,...)Trace port test• Check trace channel state and correct data recording