Lauterbach PowerTrace Serial User Manual
                                                 | |
Contents
| 
PowerTrace Serial User´s Guide 28©1989-2018 Lauterbach GmbHStart-up ScriptTRACE32 PowerView offers a powerful feature called PRACTICE. The Lauterbach script languagePRACTICE is used for automating tests, configuring the TRACE32 GUI and your debug environment.The following example shows how to configure a trace port (PCIe) and how to save the configuration.Example(A) The following settings are required:• Configuration trace environment with the command SYStem.CONFIG TRACEPORT.• Init analyzer with the command Analyzer.Init.(B) The target must be configured:• Set up the I/O-ports (PHYs). To find the required information, refer to your CPU manual.• Set up the board (buffers, jumpers, etc.). To find the required information, refer to your target userguide.• Configure PCIe root complex. PowerTrace Serial is always an endpoint:• Set up trace source.(C) The PowerTrace Serial will be trained by the root complex. Finally the channel state should be checked: |
Related manuals for Lauterbach PowerTrace Serial
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine