Leeson SPEEDMASTER SM2 Series Installation And Operation Manual
                                                                      | |
Contents
| 
45CommissioningCode Possible Settings IMPORTANTNo. Name Default SelectionP405 Current NetworkFault0 No Fault1 F.nF1 Netldle Mode2 F.nF2 Loss of Ethernet I/O connection3 F.nF3 Network Fault4 F.nF4 Explicit Message Timeout5 F.nF5 Overall Network Timeout6 F.nF6 Overall Explicit Timeout7 F.nF7 Overall I/O Message TimeoutP406 Proprietary Manufacturer specificP407 … P499 Module Specific Parameters Refer to the CommunicationsReference Guide specific to thenetwork or I/O module installed.4.5.7 Diagnostic ParametersCode Display Range(READ ONLY) IMPORTANTNo. NameP500 Fault History • Displays the last 8 faults• Format: n.xxxwhere: n = 1..8;1 is the newest faultxxx = fault message (without the F.)• see Section 5.3P501 Software version Format: x.yzP502 Drive ID A flashing display indicates that the Drive IDstored in the EPM does not match the drivemodel it is plugged into.P503 Internal Code Alternating Display: xxx-; -yyP505 DC Bus Voltage 0 {VDC} 1500P506 Motor Voltage 0 {VAC} 1000P507 Load 0 {%} 255 Motor load as % of drive’s output current rating.See section 2.2.P508 Motor Current 0.0 {A} 1000 Actual motor currentP509 Torque 0 {%} 500 Torque as % of motor rated torque(vector mode only)P510 kW 0.00 {kW} 650.0P511 kWh 0.0 {kWh} 9999999 Alternating display: xxx-; yyyy when valueexceeds 9999CALL NOW 800-985-6929http://www.automatedpt.comEmail: charles@automatedpt.comCALL NOW 800-985-6929http://www.automatedpt.comEmail: charles@automatedpt.com |
Related manuals for Leeson SPEEDMASTER SM2 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine