Louroe Electronics DG-12II Installation And Operating Instructions Manual
Also see for DG-12II: Installation and operating instructions
                                | |
PAGE 13 of 28DG-12II AND DG-MA CONNECTIONSConnect the DG-12II to the DG-MA as shown in Fig 8. Both control blocks of theDG-12II and DG-MA are marked “1,2,3,4,5. Connect terminal “1” of DG-12II to terminal“1” of DG-MA. Connect terminal “2” of DG-12II to terminal “2” DG-MA; terminal “3” ofDG-12II to terminal “3” of DG-MA; terminal “4” of DG-12II to terminal “4” of DG-MA;terminal “5” of DG-12II to terminal “5” of DG-MA. Connect the RCA cable between theDG-12II and DG-MA as shown in Fig 8.Fig. 8 Connecting the DG-12 to DG-MAIIZONE 9 ZONE 7ZONE 8ZONE 101 2 3 4 5TB GNDTB RETURNTB AUDIOALL CALL CTRLGNDJP51INPUTAUDIOOUTPUTRear of DG-MARear of DG-12IIRCA Cable8LOUROE ELECTRONICS 6955 VALJEAN AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458Website: www.louroe.com Email: sales@louroe.com(818)INSTALLATION AND OPERATING INSTRUCTIONSDG-12II 2/08 |
Related manuals for Louroe Electronics DG-12II
manualsdatabase
Your AI-powered manual search engine