PAGE 17 of 28POWER CONNECTIONS:Plug the DG-12 power supply unit to the 3-pin right angle closed Power Header[29]marked “15 Vdc” located at the rear of the DG-12II unit. Push firmly and make sure thatthe locking tables hold the plug-in connector in place. Plug the power supply to a 110 Vacoutlet. Plug the DG-MA AC cord to a 110 Vac outletIIFig. 12 Connecting power supply to DG-12IIPUSH IN&RELEASEBlackGreenWhiteto power sourceLOUROE ELECTRONICS 6955 VALJEAN AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458Website: www.louroe.com Email: sales@louroe.com(818)INSTALLATION AND OPERATING INSTRUCTIONSDG-12II 2/08