7Fig. 1 Overall dimensions and the separator fitting way.4. INSTALLATION4.1. Fitting WayP20G transducers are designed to be mounted on a 35 mm rail accor-ding to EN 60715.Overall dimensions and fitting way are shown on the fig. 1.Separators should be mounted on the rail in direct contact with anotherdevices that emit heat (eg transducer P20G). You must keep a mini-mum 5 mm distance between the devices to allow emit heat from thehousings to the ambient. Otherwise, the in rated operating temperatureof transducer which is in direct contact with the other transducer mayexceed the rated operating temperature stated operating conditions.

APPLICATION

OPERATIONAL SAFETY

FITTING

Lumel P20G series User Manual