© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - GermanyPhone +49 5251 688865-30 - tech.support@malighting.com - www.malighting.com4.1.1. StartupThis chapter describes the startup of the MA VPU application.For Dongle Users only: To realize an auto start of the MA VPU application a startup software'VPULoader.exe’ is installed on the target machine at:C:\Program Files\MA Lighting Technologies\grandMA VPU LoaderThis program is called by the operating system (e.g. Windows 7 or Windows 8.1) in startup of the MA VPU.At the initial start after the installation or the update of the MA VPU application, the end user license agreementis shown.The MA VPU application will not start, until the end user license agreement is confirmed.If you are using a MA VPU plus, the end user license agreement is shown at the internal touch display.Important:If you are using a MA VPU basic or MA VPU light, the end user license agreement is shown at the firstexternal DVI-output - so connect a display and a mouse to the MA VPU basic or MA VPU light.At the end user license agreement the user has the choice to install additional third party codecs, which can beused at the new Hap-Converter.17 of 218grandMA2 User Manual - Main Features – Installation and MaintenanceVersion 3.4 – 2018-07-25English
