© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - GermanyPhone +49 5251 688865-30 - tech.support@malighting.com - www.malighting.com4.1.5. Access VPU via NetworkTo access the VPU over the Network, make sure your computer is in the same range as the IP address that isassigned to the Ether 1 device in the VPU.In your computer open a windows explorer window and type the IP address of your VPU as shown below:A popup will show up and ask you to enter the user and password necessary to access the VPU.User / Benutzername: “MA”Password / Kennwort: “12345”Then you can transfer data to the content or the software folder.You have access to the complete partition d:\.The default folder for content is d:\content.The software folder is used to transfer software updates to the unit via Ethernet connections43 of 218grandMA2 User Manual - Main Features – Installation and MaintenanceVersion 3.4 – 2018-07-25English
