Setting the Date/TimeNOTE: When the unit is off, the date and time will still appear at the top of the screen.1. When the unit is off, press and release both the POWER and MEMORY button at thesame time. The month will begin to flash, Fig. 1.2. Press the MEMORY button to change until the desirednumber appears.NOTE: To scroll through the numbers quicker, hold down theMEMORY button.3. Press the POWER button to set the entry.4. The date, Fig. 2, followed by the hour and minutes willblink. Repeat steps 2 and 3 to adjust the date/time setting.5. After setting the minutes, the unit will automatically exit out ofthe date/time setting mode, Fig. 3.NOTE: The time is expressed in 24hr military time. The chart belowexplains the time conversion.Battery Installation/Replacement1) Press down on tab and lift the cover.2) Insert or replace 4 “AA” batteries into the compartment, matching the indicatedpolarity symbols, Fig. 1.3) To close, match up and connect the bottomhooks of the cover, then push the top end.NOTE: Replace the batteries when the Low Batterysymbol appears on the display or when the displayremains blank when the POWER button is pressed.4) It is recommended to remove the batteries if theunit will not be used for an extended period oftime.AC Power Adapter (optional)An AC adapter is available separately for battery-free operation. The AC adapter plugsinto the side of the unit as shown, Fig. 2. Please remember to practice electrical safetyprecautions while using the adapter.AC AdapterOutput: 6V DC 600mAApplying Your Blood Pressure Cuff– 10 –AC Adapter Connection– 11 –Fig. 2Fig. 1Fig. 3Fig. 1Fig. 2Regular Time(12 hours)Military Time(24 hours)Regular Time(12 hours)Military Time(24 hours)12 amMidnight 0 12 pmNoon 121 am 1 1 pm 132 am 2 2 pm 143 am 3 3 pm 154 am 4 4 pm 165 am 5 5 pm 176 am 6 6 pm 187 am 7 7 pm 198 am 8 8 pm 209 am 9 9 pm 2110 am 10 10 pm 2211 am 11 11 pm 23