MACAP M7 Series Original Instructions Manual
                        | |
Contents
| 
ENGLISH94 SAfETY INfORMATIONThis appliance has been designed exclusively for grinding coffee beans, consequently the manufacturer will not be held liablefor any damage or incidents that are caused if it is used for any other purpose.The warranty will be automatically invalidated in the event the appliance is used improperly.Only qualified operators must install the appliance or carry out any technical maintenance work.The appliance is not waterproof and must be kept well clear of any potential water sprays or very damp areas.The appliance has been designed for professional and not home use, and therefore must only be used by trained personnel.The appliance must not be used by children, or by adults with reduced physical, mental or motor capacities, nor by anyonewithout sufficient experience or knowledge, unless they receive specific training or use the appliance under the supervisionof a trained person.keep the appliance out of the reach of children. Children being supervised not to play with the appliance.The appliance has a thermal circuit breaker for the motor, when it triggers and stops the grinder, unplug the appliance at themains and wait at least one hour before turning it back on again.If the power cable is damaged it must be replaced by the manufacturer or by the technical assistance service, or at any rateby a person with similar qualifications, so as to prevent all risks.UNPLUG THE APPLIANCE AT THE MAINS BEFORE CARRYING OUT ANY MAINTENANCE OR CLEANING WORk.5 INSTALLATION AND ELECTRICAL CONNECTIONSInstallation must be carried out by trained technical personnel.Installation must be carried out in strict compliance with the safety provisions currently in force in the country of use, withparticular reference to the accident and fire prevention regulations and electricity authority regulations.Place the appliance on a flat surface to ensure it is perfectly stable. Before connecting the appliance to the mains:MX 900Ø 65 mm-300 W900 rpmP220 x 370 x h 60013 Kg40 s ON / 150 s OFFM7 900Ø 75 mm-600 W900 rpmP250 x 360 x h 63515,5 Kg25 s ON / 60 s OFFMXK-Ø 63 mm350 W350 rpmP220 x 370 x h 60015 Kg40 s ON / 160 s OFFM7K-Ø 68 mm520 W350 rpmP250 x 360 x h 63516 Kg25 s ON / 90 s OFFMC6Ø 65 mm340 W1400 rpm220 x 370 x h 60012,5 Kg40 s ON / 120 s OFFMC7Ø 75 mm800 W1400 rpm250 x 360 x h 63515 Kg25 s ON / 90 s OFFA3---P220 x 210 x h 3458 Kg-MC4 / MC5 / MC5 plusØ 58 mm250 W1400 rpm190 x 210 x h 430 / h 470 / h 5058,5 Kg60 s ON / 180 s OFFFlat grinding bladespowerMotorDosing counterDimensions (mm)Net weightOperating cycle (230 V - 50 Hz)Conical grinding bladesFlat grinding bladespowerMotorDosing counterDimensions (mm)Net weightOperating cycle (230 V - 50 Hz) |
Related manuals for MACAP A3
manualsdatabase
Your AI-powered manual search engine