MADRIX 3 PLEXUS User Manual / Handbuch134© 2015 inoage GmbHA warning will be provided if the IP Address and the Subnet Mask are not compatible with eachother.Improved German language support.Improved Spanish language support.Fixed an issue that would reset the network settings with the next start when a Subnet Maskhigher than 255.255.255.0 was set up.Fixed issues with sending out data when receiving Art-Net data from two sources.Fixed an issue showing an incorrect On Universe number under Remote Control > Remote Optionswhen switching from Receive via Art-Net to Receive via DMX.Fixed an issue that showed incorrect information about the Scenes on the SD card whenswitching from the menu Stand-Alone > Scenes to Stand-Alone > Playback1.4.2 Updating The FirmwareNoteIt is recommended to always use the latest firmware and drivers.How To Check The Firmware VersionOn The DeviceOn the device, navigate to the menu 'Information' > 'Version'. Thecurrent version is 1.08.5168
