MADRIX PLEXUS User Manual
Also see for PLEXUS: User manualQuick start guideQuick start guide
                                                                                                                                                                                                                                                                                                                | |
Contents
| 
MADRIX PLEXUS User Manual (English) 7© 2015 inoage GmbHVersion InformationThe current MADRIX version is: MADRIX 3.3bThe current MADRIX PLEXUS firmware version is: 1.08.5168It is recommended to always use the latest firmware and drivers.1.2 MADRIX PLEXUS (Hardware)The MADRIX PLEXUS is a USB 2.0 DMX512 interface.In general, this device is designed to be operated as a hardware control interface to be connectedtowards various types of controllable lights / lighting controllers via DMX512 (USB-to-DMX) or Art-Net (DMX-over-Ethernet). Do not use the interface for any other, deviating purpose.The device can be connected to and disconnected from the PC during use and without a reboot(Hot Swapping and Plug and Play). Multiple interfaces can be used at the same time. Please mindthe correct supply of power in this case.Please read the following subtopics to learn more about MADRIX PLEXUS.1.2.1 LCD Graphics Display (PLEXUS Menus)IntroductionThis chapter describes the numerous menus provided on the device as well as further informationregarding the LCD graphics display. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine