MadgeTech RFC1000 Product User Manual
Also see for RFC1000: Product user guideProduct Information CardProduct user guideProduct user guideUser guide
         | |
4. Select Install on the dialog box.Activating & Deploying the Data Logger1. Connect the RFC1000 wireless transceiver to the Windows PC with the provided USB cable.2. Additional RFC1000’s can be used as repeaters to transmit over greater distances. Plug each oneinto an electrical outlet in the desired locations.3. Verify that the data loggers (sold separately) are in wireless transmission mode.4. On the Windows PC, launch the MadgeTech 4 Software.5. All active data loggers will be listed in the Device tab within the Connected Devices panel.6. To claim a data logger, select the desired data logger in the list and click the Claim icon.7. Once the data logger has been claimed, select a start method in the Device tab.For steps to claim the data logger and view data using MadgeTech CloudServices, refer to the MadgeTech Cloud Services Software Manual at:www.madgetech.com/mt-cloud-manual.pdfMounting InstructionsThe RFC1000 has a pivoting external antenna to accommodate either tabletop or wall mountedorientation. For best wireless performance, RFC1000 wireless transceivers and the MadgeTechdata loggers should be mounted in the same orientation. This usually means that the externalantenna will be pointing straight up. |
Related manuals for MadgeTech RFC1000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine