MadgeTech RFC1000 Product User Manual
Also see for RFC1000: Product user guideProduct Information CardProduct user guideProduct user guideUser guide
         | |
Channel ProgrammingDifferent wireless channels may be used to create multiple networks in one area, or to avoidwireless interference from other devices. Any RFC1000 wireless transceiver or MadgeTech datalogger on the same network is required to use the same channel. If all of the devices are not on thesame channel, the devices will not communicate with one another. The RFC1000 is programmedby default on channel 25.CHANNEL NOTE: MadgeTech wireless data loggers and RFC1000 wireless transceivers purchasedprior to April 15, 2016 are programmed by default to channel 11. Please refer to the Product UserGuide provided with these devices for instructions to change the channel selection if needed.Configuring the Channel Settings of the RFC1000 1.Unplug the RFC1000.2. Use a Phillips head screwdriver to unscrew the back of the RFC1000 enclosure.3. Find the DIP switches located on the front of the PCB circuit board (diagram 1a).4. Change the DIP switches to match the desired channel (diagram 1b).5. Screw the RFC1000 enclosure back together. |
Related manuals for MadgeTech RFC1000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine