MadgeTech RFVolt2000A User Manual

Contents

MadgeTech RFVolt2000A User Manual Manual pdf 14 page image

Product User GuideRFVolt2000A: To program the channel on the RFVolt2000A data logger, start by switching thewireless mode to OFF by holding down the Wireless button on the data logger for 5 seconds.Step 1: Use the USB Cable, plug the USB end of the cable into an available USB port on the PC.Step 2: Plug the opposite end of the cable into the communication port on the RFVolt2000A.Step 3: Open the MadgeTech Software. Locate and select the RFVolt2000A in the ConnectedDevices panel.Step 4: In the Device tab, click the Properties icon. The Properties screen will display informationabout the device including Wireless setting.Step 5: Under the Wireless tab, select a desired channel (11-25) that will match with the RFC1000.Save all changes, disconnect the data logger, and return the device to wireless mode byholding down the Wireless button for 5 seconds.Deploying and Activating DevicesStep 1: Plug the RFC1000 into the USB port on the base station computer. (Additional RFC1000scan be used as repeaters to transmit over greater distances)Step 2: If using multiple RFC1000s plug each one into a wall outlet in the desired locations.(If transmitting over a distance greater than 1000 feet indoors or 4000 feet outdoors or thereare walls/obstacles/corners that need to be maneuvered around, set up additional RFC1000sas needed.)Step 3: Verify that the data loggers are in wireless transmission mode. (See Channel Programmingsteps above)Step 4: On a Windows PC, launch the Madgetech 4 software program. All active data loggers willbe listed in the software showing that the device(s) are recognized.Step 5: To activate the data loggers, click on one to highlight, then click the Claim icon, and thenclick the Start button. Do this for each logger in the list that needs to be activated.Interface Type USB (to PC) / Wireless (to Data Logger)Operating Environment -20°C to +85°C, 0 to 95%RH non-condensingLED Indicators Red & GreenEnclosure Materials ABS Plastic (body), PVC Plastic (antenna)Dimensions Enclosure: 3.8” x 1.6” x 0.8” / Antenna: 7.2”Approvals FCC ID:OA3MRF24J40MC, IC#: 7693A-24J40MCTransmission Distance(To other RFC1000s)4000’ max. outdoor - line of sight unobstructed1000’ max. indoors - typical urban environmentTransmission Distance(To data loggers)2000’ max. outdoor - line of sight unobstructed500’ max. indoors - typical urbanMaximum number ofconnected data loggers 64Frequency 2.405GHz - 2.475GHzIngress Protection IP40RFC1000 General Specifications12Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

/ 16

Related manuals for MadgeTech RFVolt2000A