MadgeTech RFVolt2000A User Manual

Contents

MadgeTech RFVolt2000A User Manual Manual pdf 3 page image

11. Install the MadgeTech 4 Software and USB Drivers onto a Windows PC.2. The RFC1000 interface device comes with a USB cable. Plug one end of the cable intoan available USB port on the PC and plug the opposite end of the cable into thecommunication port on the RFC1000.3. Push and hold the wireless button on the RFVolt2000A for 5 seconds to activate wirelesscommunication. The display will confirm “Wireless: ON” and the blue LED will blinkevery 15 seconds.4. Launch the MadgeTech 4 Software. All active MadgeTech Data Loggers that are withinrange will automatically appear in the connected devices window. Each data logger inthe list can be identified by serial number (printed on the exterior of the logger).5. To claim a device, select the desired data logger in the list and click the Claim icon.6. Select the start method, reading rate and any other parameters appropriate for thedesired data logging application. Once configured, deploy the data logger by clickingthe Start icon.7. To download data, select the device in the list, click the Stop icon, and then click theDownload icon. A graph will automatically display the data.Quick Start Steps1. Install the MadgeTech 4 Software and USB Drivers onto a Windows PC.2. Before plugging the data logger in the computer, make sure the wireless setting onthe device is set to “Wireless: OFF”. If wireless mode is on, press and hold the Wirelessbutton on the device for 5 seconds.3. The RFVolt2000A comes with a USB cable. Plug one end of the cable into an availableUSB port on the PC and plug the opposite end of the cable into the communicationport on the RFVolt2000A.4. Launch the MadgeTech 4 Software. The RFVolt2000A will appear in the connecteddevices window indicating the device has been recognized.5. Select the start method, reading rate and any other parameters appropriate for thedesired data logging application. Once configured, deploy the data logger by clickingthe Start icon.6. To download data, select the device in the list, click the Stop icon, and then click theDownload icon. A graph will automatically display the data.Product Operation (Plugged In)Product Operation (Wireless)Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524