Magellan 310 User Manual

Also see for eXplorist 310: User manual User manual User manual

Contents

41Magellan SporTrak GPS ReceiverReferenceAn alternative method to entering the edit mode is after highlightingthe waypoint you wish to modify press MENU. Highlight Edit WPTand press ENTER.Viewing a Map Object on the Map — Displays on the Map the MapObject you have selected.Note: This function is for viewing map objects (cities, airports, etc.)only. See Viewing User Waypoints on the Map for instructions on howto perform this feature using User waypoints.FromAnyScreenHighlightDatabaseSelectWaypointfrom the listSelectDatabaseCategoryViewing a User Waypoint on the Map — Locates and displays on the Mapthe selected User Waypoint.FromAnyScreenHighlightDatabaseSelectWaypointfrom the listHighlightUserUse U/D arrowsto highlight“View” buttonNote: If the waypoint is used in a route you will get a warning that it isin a route after selecting it from the list. This is because the screen thatyou access the view button can also be used to edit the waypoint and itmay be undesirable to edit a waypoint that is being used in a route.Also note that any edits you make to the waypoint are not saved whenyou use the View button. You need to highlight the Save button andpress ENTER to record your changes.Saving a Map Object as a User Waypoint — Saves a Map Object as awaypoint to be stored in your User Waypoint List. You would do thisshould you want to modify the object or if you wanted to use the objectas a waypoint in the Sun/Moon or Fish/Hunt functions.Follow the instructions above for Viewing a Map Object on a Map. Pressand hold GOTO for 2-3 seconds. Edit any field of the waypoint thatyou want and when you are done, highlight “Save” and press ENTER.