Magellan eXplorist Pro 10 User Manual

Also see for GiS explorist Pro 10: Specification

SetupMagellan eXplorist Pro 10 GPS Receiver 5Accessing the USB Connector1. Using your fingernail at [B], open the USB Portcover. When done, be sure to close the coverfirmly to prevent water or dirt from entering theUSB port. (Note that the USB connector isangled up slightly.)micro SD CardA micro SD card can be installed in the Magellan eXplorist Pro 10 to store and retrieve data. Please see yourapplication instructions for details on how to save to or access data from the micro SD card.Installing a micro SD Card1. Remove the battery door and batteries.2. Slide the silver micro SD card retaining plate towardsthe top of the receiver.3. Lift the retaining plate up with your fingernail.4. Insert a micro SD card with the contacts down,pointing towards the top of the receiver.5. Close the retaining plate and slide towards thebottom of the receiver, locking the micro SD card inplace.6. Reinstall the batteries and replace the battery door.B